Like in the Sinergia 40 The demand for this motorboat was clear: fast with optimum seakindness attitude. Modern technologies are applied in the construction of this motorboat, vinylester resin with vacuum consolidated balsa core using biaxial and unidirectional fibers. Also there is a layer of Kevlar cloth in the impact zone. Bulkheads are PVC combined with E-glass biaxial fabrics with unidirectional fibers in the cappings and local reinforcements. A very light and strong boat will be obtained with the obvious benefits in propulsion. The interior layout shows an optimum use of space and a comfortable arrangement. The twin engines have 800 HP each one, giving 37 knots of maximum speed. The hull shows flared topsides, deep V, with almost no raise in the aft buttocks. The hull has slight reminiscences of an inverted bell shape for a smooth performance in waves, but still keeping features for attaining very high speed. It has a rounded pad at centreline in the aft portion of the hull bottom, slight convex shape with high deadrise section and a flat chine of moderate width.
This Open 55' is under construction at Sinergia composites (Spain).